We are manufacturer of brass Hollow SECTIONS. These sections and bars are said to be the best alternative for machined parts which has bore like cable glands, brass sleeves, valves and various other brass components which has bore in its centre.
A
is always round and can look like a pipe or a tube, however, typically the walls are much thicker. A
has the strength of a solid round bar, but since there is no centre, there is less weight per foot which can sometimes save money, without compromising strength. As
makes less scrap compared to brass extrusion rods, raw material required as input is also reduced and which in-turn reduce the working capital also.
These
are mainly used in manufacturing forged components and pressing materials and hence used mainly in making valve components.. Industry using forging hollow rods are forged components, industrial valves, defence components, watch case and automobile valves components.
is not welded together. Instead, hollow bar is created using one of two processes. The first, called drilling, involves sending a drill through a solid bar stock. The second, called centrifugal casting, is when molten metal is poured into a cast as it undergoes high-speed rotation.
The
is much stronger than the solid one, and it has the advantage of greatly reducing or totally eliminating buckling problems. This is why several manufacturers offer stationary-barrel rod pumps equipped with pull tubes to extend the service life of pumps in deeper wells.
Stress relieving process is an indispensable part of
production. After the
production stress relieving process is applied as a standard process.
It is enable to less tool wear, less material consumption and metal loss by decreasing drilling and processing costs to the lowest.
Size:
ID: 10mm to 80mm
OD:20mm to 100mm
Types:
Round
Hexagonal
Square
Octagon
We are also manufacturing various BRASS products like,
BRASS RODS AND SECTIONS i.e.
BRASS BALL VALVES i.e.
AND
OTHER BRASS INSERT i.e.
HOLLOW SECTIONS
We are manufacturer of brass Hollow SECTIONS. These sections and bars are said to be the best alternative for machined parts which has bore like cable glands, brass sleeves, valves and various other brass components which has bore in its centre.
A
Hollow SECTIONS
is always round and can look like a pipe or a tube, however, typically the walls are much thicker. A
Hollow SECTIONS
has the strength of a solid round bar, but since there is no centre, there is less weight per foot which can sometimes save money, without compromising strength. As
Hollow SECTIONS
makes less scrap compared to brass extrusion rods, raw material required as input is also reduced and which in-turn reduce the working capital also.
These
Hollow SECTIONS
are mainly used in manufacturing forged components and pressing materials and hence used mainly in making valve components.. Industry using forging hollow rods are forged components, industrial valves, defence components, watch case and automobile valves components.
Hollow SECTIONS
is not welded together. Instead, hollow bar is created using one of two processes. The first, called drilling, involves sending a drill through a solid bar stock. The second, called centrifugal casting, is when molten metal is poured into a cast as it undergoes high-speed rotation.
The
Hollow SECTIONS
is much stronger than the solid one, and it has the advantage of greatly reducing or totally eliminating buckling problems. This is why several manufacturers offer stationary-barrel rod pumps equipped with pull tubes to extend the service life of pumps in deeper wells.
Stress relieving process is an indispensable part of
Hollow SECTIONS
production. After the
Hollow SECTIONS
production stress relieving process is applied as a standard process.
It is enable to less tool wear, less material consumption and metal loss by decreasing drilling and processing costs to the lowest.
Size:
ID: 10mm to 80mm
OD:20mm to 100mm
Types:
Round
Hexagonal
Square
Octagon
We are also manufacturing various BRASS products like,
BRASS PLUMBING FITTINGS, BRASS FIRE FIGHTING PARTS,BRASS GAS FITTING, BRASS BATH FITTING ACC, BRASS AGRO FITTING,
BRASS RODS AND SECTIONS i.e.
SOLID RODS, HOLLOW RODS , SOLID SECTIONS , HOLLOW SECTIONS,
BRASS BALL VALVES i.e.
BALL VALVES
AND
NRV VALVE TYPES ,
OTHER BRASS INSERT i.e.
PPR FITTING, UPVC FITTING, CPVC FITTING, PVC PIPE FITTINGS.
Archives
Categories
Archives
Recent Post
Categories
Meta
Calender